Cleaning Room Floor Drain FURO 325

Stainless steel floor drain designed for efficient removal of dirty water and separation of sand from scrubber machines in cleaning rooms. The large water capacity and liftable sand trap ensure trouble-free operation and long-term functionality, making the drain ideal for both public and industrial cleaning rooms. Available from stock for immediate delivery.

Application: The floor drain is designed for easy and efficient emptying of dirty water and separation of sand from scrubbers in cleaning rooms.
Large accumulated water volume: The drain can handle emptying of cleaning and scrubber tanks without risk of flooding.
Liftable sand trap: Equipped with a large 7 L sand trap that effectively separates sand and debris, protecting the drainage system from clogging.
Drain plate: 200 mm wide slot plate with Ø 60 mm holes for easy connection of the cleaning machine’s discharge hose.
Turbulence-regulating baffle: Distributes the water flow evenly over the sand trap, increasing sand separation.
Variable length: 400–1200 mm in 200 mm increments, fixed width 400 mm.
Stocked size for immediate delivery: 600 × 400 mm.
Material: Acid-resistant stainless steel EN 1.4404 (SS 2348) for high durability and corrosion resistance.
For embedding in concrete floors: Easy integration into existing cleaning room floors.
Top covers: Suitable for tiled floors (K3, K4, K5), poured floors, vinyl, and steel-ground concrete floors; 360° rotatable, angle-adjustable, and telescopic.
Outlet: End-positioned with removable water trap for easy cleaning.
Non-slip stainless steel grate: Safe and durable, supplied in sections with a maximum weight of 6 kg per section.
Installation accessories: Supplied with protective cover to prevent concrete from entering the drain during casting, sturdy fastening ears for easy height adjustment from above. Includes rebate strips for poured floors.

Technical Specification – FURO 325 Cleaning Room Floor Drain

Material: Acid-resistant stainless steel EN 1.4404 (SS 2348)
Width (mm): 400
Length (mm): 400–1200, in 200 mm increments
Water trap: Removable
Sand trap: Yes, volume 7 L
Drain plate: 200 mm wide with Ø 60 mm holes
Outlet: End-positioned, see section “Outlet and Flow Capacity” for details
Grate: Stainless steel, non-slip, max 6 kg per section
Floor adaptation: Tiled floors (K3, K4, K5), poured floors, vinyl, steel-ground concrete floors
EPDM gaskets: EN 681-1 type Wc

L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

För skurmaskiner av typen ”Gå-bakom” och för små åkbara med smutsvattentankar mellan 15-120 liter rekommenderas storlek 600x400 mm.
För större skurmaskiner med smutsvattentank mellan 120-150 liter bör brunnen vara minst dimension 800x400 mm för att få tillräckligt stor ackumulerande volym.
För mycket stora maskiner bör städrumsbrunnen dimensioneras individuellt.

Variants

Depth measurements (mm):

Upper part depth (D) = 210
Channel depth (RD) = 95

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer

Water proofing: Clinkers on sandwiched waterproofing membrane

Water proofing drain flange: Clamping flange

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 325 cleaning room drain:

*The product has a slope towards the outlet.

For more information, see the section:
"Water flow, total height, upper part depth, and slope towards outlet"

Construction dimensions for FURO 325 cleaning room drain:

S₁=710 mm
F₁=650 mm

Drains and channels always have a connection pipe and their water flow (V.g.) to consider. Water flow is always measured from the so-called bottom line of the pipe.

To facilitate product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface to where the water exits the product. For bottom outlets, the measurement point is where the spigot begins.

The total height (H) is always made up of the top depth (D) plus the outlet section of the product. If the top depth is increased, the total height will also increase, affecting the product's water flow.

Dimensions for FURO 325:

Upper part depth (D) is 210 mm. The channel depth (RD) is 95 mm.
Total height (H) is therefore 342 mm.

Slope towards the outlet is adapted to the product and floor type.

S 75

Side outlet Ø75 mm

Capacity 4 l/s

S 110

Side outlet Ø110 mm

Capacity 4 l/s

B 75

Bottom outlet Ø75 mm

Capacity 4 l/s

B 110

Bottom outlet Ø110 mm

Capacity 4 l/s

Trap

Part no. 220VH12

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Part no. 220VA2

Slip-resistant grid, L15

Slip-resistant grid with load class L15.

Maximum load: 1500 kg

Part no. Z-GALLER-L15

Grid, M125

Grid with load class M125

Maximum load: 12500 kg

Part no. Z-GALLER-M125

Strainer basket, 1,2 liters

Volume: 1.2 l
Capacity: 4.0 l/s

Part no. 220SK32

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for trap

Key for trap with shut-off.

Part no. 1NV1

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

Capacity: 6 liters per second

Part no. 1VSU220

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Documents

Technical overview (in swedish)

Installation instructions for earth braid

Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.

Download MagiCAD model for this product.

Cleaning Room Floor Drain FURO 325

Variants

Clinker floor K3

Clinker floor K4

Clinker floor K5

Resin flooring

Vinyl flooring

Concrete floor

Trap

Trap with mechanical odor stop

Water trap, odor and backflow stop

Trap with shut-off function

Slip-resistant grid, L15

Grid, M125

Strainer basket, 1,2 liters

Lifting tool

Key for trap

Radon sealing

Earth braid

Drain without trap

Mounting, threaded rod

Plastic mounting rod

Bits for plastic mounting rod

Sealant Aqua Tät

Documents

BIM and CAD files

Do you have any questions?