Garage and Threshold Channel FURO 159-02

FURO 159–02 is a robust floor channel with a large sand trap and water trap. The channel is manufactured from acid-resistant stainless steel EN 1.4404 (SS 2348) and designed to withstand demanding environments with heavy loads and intense traffic, making it ideal for industries, workshops, car parks, and garages. Adapted for embedding in concrete floors.

FURO 159–02 is a robust floor channel with a large sand trap and water trap. The channel is manufactured from acid-resistant stainless steel EN 1.4404 (SS 2348) and designed to withstand demanding environments with heavy loads and intense traffic, making it ideal for industries, workshops, car parks, and garages. Adapted for embedding in concrete floors.
The floor channel can also be used as a barrier channel at entrances or as linear drainage in floors with sloped surfaces. Thanks to its durable construction and flexible lengths, it is a long-lasting choice for efficient drainage in demanding environments.
As standard, the entrance and garage channel is supplied with an Omega-pattern grate, with other options available under the section “Grates.” For easier handling, grates and covers are delivered in sections of 500 mm or 1000 mm, with a maximum weight of 8 kg per section.
FURO 159–02 is available for different floor types such as tiled floors, resin floors, and steel-trowelled concrete floors. For easier installation, the channel is delivered with accessories such as protection against concrete spillage during casting, sturdy fixing lugs for height adjustment from above, and recess strips for mounting in resin floors.

Installation:

Supplied covered to prevent concrete from entering during casting
Fixing lugs for easy anchoring and height adjustment from above
Recess strips on bonding flanges for resin floors

Technical specification – FURO 159–02

Material: Acid-resistant stainless steel EN 1.4404 (SS 2348)
Length: Variable between 1300–18300 mm (in 500 mm increments)
Width: 110 mm (fixed dimension)
Outlet: See “Outlet and flow capacity”
Grates: Standard Omega, supplied in sections of 500 or 1000 mm (max 8 kg each)
Delivery in sections: Lengths over 4000 mm are supplied in sections of 1000–2900 mm

M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Variable length (mm):

Length (L) = 1300–18300, in increments of 500
Fixed width (mm): 110

Dimensions refer to the grate dimension of the channel.

Top section depth = 204 mm at outlet.

Outlet positioning:
As standard, the outlet is positioned c/c 150 mm from the left. However, alternative positioning is available.

Specify c/c from the left, in increments of 150 mm.

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for Garage and Threshold Channel FURO 159–02:

*The product has a slope towards the outlet. For more information, see section:
Water flow, total height, upper part depth, and slope towards the outlet.

Construction dimensions for floor channel FURO 159-02:
S1 = 411 mm
F1 = 348 mm
S2 = 551 mm
F2 = 488 mm

S 75

Side outlet Ø75 mm
Capacity > 4,0 l/s

S 110

Side outlet Ø110 mm
Capacity > 4,0 l/s

B 75

Bottom outlet Ø75 mm
Capacity > 4,0 l/s

B 110

Bottom outlet Ø110 mm

Capacity > 4,0 l/s

Trap

Part no. 220VH12

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Part no. 220VA2

Screwed Grating Plate Sigma, M125

Screwed grating plate with the "Sigma" pattern.

Load class: M125

Part no. 1SLMSS11101

Grating Plate Sigma, M125

Grating plate with the "Sigma" pattern.

Load class: M125

Part no. 1SLMS11101

Grating Plate Omega, M125

Grating plate with the "Omega" pattern.

Load class: M125

Part no. 1SLMO11101

Epsilon Grating Plate, M125

Grating plate with the "Epsilon" pattern.

Load class: M125

Part no. 1SLME11101

Screwed Grating Plate Epsilon, L15

Screwed grating plate with the "Epsilon" pattern.

Load class: M125

Part no. 1SLMES11101

Screwed Grating Plate Omega, M125

Screwed grating plate with the "Omega" pattern.

Load class: M125

Part no. 1SLMOS11101

OMEGA grate

Grating with “Omega” pattern. Included as standard.

Load class: M125

Part no. Z-OMEGA-159

EPSILON grate

Grating with “Epsilon” pattern.

Load class: M125

Part no. Z-EPSILON-159

SIGMA grate

Grating with “Sigma” pattern.

Load class: M125

Part no. Z-SIGMA-159

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Screw-fixed grate

Screw fixing is recommended for doorways and channels exposed to frequent traffic.

Part no. 1VFK-SILPLAT

Extra reinforcement strip

Extra reinforcement strip under the edge of the channel, recommended for channels exposed to heavy or frequent traffic.

Part no. Z-1EF159

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

We offer the possibility to customize our products according to your needs. Below, we show two examples of customizations for FURO 159–00. If you need assistance with adapting your floor channel, Contact us.

Angled channel
The channel can be manufactured with corners at 45° or 90° angles.

Additional outlets
The channel can be fitted with multiple outlets. Specify the desired c/c spacing for each outlet.

Documents

Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.

Download MagiCAD model for this product.