Robust stainless steel floor drain designed for industrial settings, workshops, and environments with heavy traffic. Built for long-lasting durability and easy installation in high-load environments.

Floor drain FURO 140

Robust floor drain designed for environments with heavier loads, such as industry, workshops, garages, and parking facilities. The drain's slot cover withstands heavy traffic. Available in stock for quick delivery.

The drain's robust construction and slot cover with load class M125 make it ideal for environments with heavy traffic, such as industry, workshops, garages, and parking facilities.
Designed for embedding in concrete floors with 360° rotating, angle-adjustable, and telescopic components for many common floor types, including tile floors, poured floors, and steel-ground concrete floors.
The floor drain is made of acid-resistant stainless steel EN 1.4404 (SS 2348) for long durability and high corrosion resistance.
EPDM rubber seals according to EN 681-1 type Wc.
Equipped with a removable trap with a handle for easy cleaning and maintenance.
Available in stock for immediate delivery.

Installation:

The drain is delivered with a cover to prevent concrete from flowing into the drain during casting.
Equipped with sturdy anchoring ears for secure attachment to the joists. For resin flooring, spacer strips are included on the bonding flanges. Adjustable legs allow for easy height adjustment from above (see Installation accessories).

M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 140 floor drain

For more information, see the section:
"Water flow, total height, upper part depth, and slope towards outlet".

Construction dimensions for FURO 140 floor drain:

S1: Ø 350 mm

F1: Ø 270 mm

Drains and channels always have a connection pipe and a flow path to consider. The flow path is always measured at the so-called bottom line of the pipe.

To simplify product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface down to where the water exits the product. For bottom outlets, the measurement point is where the socket begins.

The total height (H) always consists of the depth of the upper part (D) plus the outlet part of the product. If the depth of the upper part is increased, the total height also increases, affecting the product’s flow path.

Dimensions for FURO 140:
Upper part depth (D) is 29 mm. The total height (H) is then 161 mm.

If an extension or inlet part is selected, the total height (H) increases by 82 mm.

Slope toward outlet:
The slope toward the outlet is adapted to the product and floor type.

S 75

Side outlet Ø75 mm

Capacity 2,8 l/s

S 110

Side outlet Ø110 mm

Capacity 2,8 l/s

B 75

Bottom outlet Ø75 mm

Capacity 2,9 l/s

B 110

Bottom outlet Ø110 mm

Capacity 2,9 l/s

Trap

Part no. 220VH12

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Part no. 220VA2

Slotted cover, M125

Robust and durable slotted cover designed for heavy traffic.

Load class: M125

Part no. Z-220SLM11

Strainer basket, 1,2 liters

Volume: 1.2 l
Capacity: 4.0 l/s

Part no. 220SK32

Strainer basket, 2.7 liters

The strainer basket is suitable for drains without a trap and drains with an extension part.

Volume: 2.7 l
Capacity: 4.0 l/s

Part no. 220SK41

Sand trap, 0.9 liters

Volume: 0.9 l
Capacity: 1.5 l/s

Part no. 220SF61

Sand trap, 1,5 liters

The sand trap fits in gullies and drains with an extension part.

Volume: 1.5 l
Capacity: 1.5 l/s

Part no. 220SF21

Sand trap, 2,4 liters

The sand trap can only be selected if the drain lacks a water trap.

Volume: 2.4 l
Capacity: 5.0 l/s

Part no. 220SF52

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for water trap

Key for locking Water trap 220VA2.

Part no. 1NV1

Fastskruvning av spaltlock

Part no. 1VF140

Extension part

Extension part, provides space for extra large accessories. Increases total height by 82 mm.

Part no. 1VPA220

Inlet part

Inlet part with Ø 50 mm connection. Increases total height by 82 mm.

Part no. 1VIN220

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Documents

Technical overview (in swedish)

Installation instructions for earth braid