Floor drain for laundry rooms FURO 320

Floor drain for laundry rooms FURO 320

Floor channel in acid-resistant stainless steel, designed for laundry rooms, washrooms, heavy-duty laundry areas, and public washing facilities. FURO 320 efficiently drains wastewater behind one or more washing machines and protects the drainage system with a lift-out lint strainer.
410343ed-264b-4180-9b04-62ff0f3e54f0.png

Immediate delivery

  • Floor channel FURO 320 is designed to be cast into the floor behind one or more washing machines and is ideal for laundry rooms, heavy-duty laundry, and other public washing facilities.
     
  • The channel efficiently drains wastewater and separates lint and other particles that could block the drainage system. Separation is achieved using a lift-out lint strainer with 5 mm perforations and a large open area, optimizing intervals between inspection and cleaning.
     
  • The floor channel is available in variable lengths from 600–6000 mm (in 100 mm increments). For floor types such as tile K4, K5, and vinyl, the length is variable from 600–3000 mm (in 100 mm increments). Stocked sizes: 300 x 300 and 500 x 300 mm.
     
  • The channel’s strainer plate is made in 300 mm sections with cutouts Ø 40 mm for drainage pipes in each section.
     
  • By default, the outlet is positioned at the end, but optional outlet placement is available.
     
  • The floor channel’s water trap and lint strainer are removable for easy cleaning and maintenance.
     
  • Included installation accessories: Supplied with a cover to prevent concrete spill during casting and sturdy mounting brackets for easy height adjustment from above. For mass floors, cut-out strips are also included.
     

Technical specifications – Floor channel for laundry facilities FURO 320

Material: Acid-resistant stainless steel, EN 1.4404
Length (mm): 600–6000 / 600–3000 (K4, K5 and vinyl)
Width (mm): 300
Strainer plates: 300 mm sections, cutout Ø 40 mm per section
Floor types: For tiled floors (K3, K4 and K5), mass floors, vinyl, and steel-finished concrete floors. The top sections are 360° rotatable, angle-adjustable, and telescopic.
Sealing: EPDM rubber seals according to EN 681-1 type Wc
Water trap: Removable
Outlet: Standard end position, optional placement available
Stocked sizes (mm): 300 x 300 and 500 x 500

  • 9 KN Tested and validated in a swimming pool environment. (Tested for an equivalent 9 kN "Test Load" according to SS-EN 1253-1).

Variants

FURO320_VA_1.jpg

Variable length (mm):

  • Length (L) = 600–6000* (in 100 mm increments)
  • Fixed width = 300

*For floor types tile K4, K5, and vinyl, the variable length is 600–3000, in 100 mm increments.

Dimensions refer to the channel’s grate measurements.

FURO320_VA_2.jpg

Variable depth (mm):

  • Depth (D) = 100, standard, a suitable choice for lengths up to 3000.
  • Depth (D) = 150, recommended for lengths over 3000.
     

Outlet placement:

The standard outlet is positioned at the end, but it is possible to choose a center position or any custom placement.

  • Specify c/c mm from the left. Minimum 150, in 100 mm increments.

Clinker floor K3

Floor material: Clinker in adhesives
Water proofing: Floor without waterproofing
Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer
Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange
Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer
Water proofing: Clinkers on sandwiched waterproofing membrane
Water proofing drain flange: Clamping flange

Resin flooring

Floor material: Resin flooring
Water proofing: Compound floor
Water proofing drain flange: Recess for resin floor

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm
Water proofing: Vinyl flooring
Water proofing drain flange: FURO clamping flange

Concrete floor

Floor material: Concrete floor
Water proofing: Floor without waterproofing
Water proofing drain flange: None
FURO320_BMATT_1-sv-se.jpg

Dimensions for floor channel FURO 320

*The channel has a slope towards the outlet.

Byggmått_ränna_SM_1.jpg

Construction dimensions for FURO 320:

220S75_utlopp.png
S 75

Side outlet Ø75 mm

Capacity > 4,1 l/s

220S110_utlopp.png
S 110

Side outlet Ø110 mm

Capacity > 4,1 l/s

220B75_utlopp.png
B 75

Bottom outlet Ø75 mm

Capacity > 4,1 l/s

220B110_utlopp.png
B 110

Bottom outlet Ø110 mm

Capacity > 4,1 l/s

Trap

Part no. 220VH12

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Strainer plate

Strainer plate designed for laundry environments. Made in 300 mm sections with cutouts Ø 40 mm for drainage pipes in each section.

  • Maximum load: 900 kg

Part no. Z-SILPLÅT-9KN

Sand trap, 0.9 liters

  • Volume: 0.9 l
  • Capacity: 1.5 l/s

Part no. 220SF61

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Radon sealing

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Drain without trap

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

  • Capacity: 6 liters per second

Part no. 1VSU220

Mounting, threaded rod

Easy adjustment from above.

  • Height 300 mm.
  • Foot diameter = 100 mm.

Part no. 1SB30

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

SH.png BVB.svg
AMA
AMA code: PRB.12
MagiCAD Cloud

BIM and CAD files

Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.

Magicad Cloud

Here you can download fixed MagiCAD models of the product. Missing the model in MagiCAD? Contact Furhoffs and we will help you!

MagiCAD Selection tool

Here you can configure and download a MagiCAD model for the product.

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us