Low-profile floor drain FURO 123

Low-profile stainless steel floor drain specifically designed for renovation and remodeling projects (ROT) that require high water flow capacity.

The low-profile design of the well makes it optimal for renovation and remodeling projects (ROT) that require high water flow and have tight installation spaces.
Manufactured in stainless steel EN 1.4301 (SS 2333) or acid-resistant stainless steel EN 1.4404 (SS 2348) for high corrosion resistance and long durability.
Equipped with a internal water trap and fixed outlet section on the short side.
Stainless, slip-resistant grate manufactured in sections, with each section having a maximum weight of 6 kg for easy and ergonomic handling.
There is the option to equip the well with functional accessories and additional components for further customization to specific needs.
Designed for embedding in concrete beams with top sections suitable for flooring types such as tile floors, massage floors, plastic mats, and steel-polished concrete floors.

Sizes and Variables:

Standard size 600x400 mm is in stock for immediate delivery.

There is the option to manufacture the well in variable lengths and widths in even increments of 100 mm.

Variable length: 300–1200 mm
Variable width: 300–600 mm

Installation:

Delivered fully assembled and covered to prevent concrete from flowing into the well during casting (up to a width of 400 mm).
For Resin flooring, recess strips are included on the bonding flanges.
Robust mounting ears for various anchoring in the beams are included.
Adjustable legs for easy installation and height adjustment are available. See the Installation Accessories section.

L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.

The low-profile design of FURO 123 makes it suitable for rehabilitation and renovation projects (ROT) where high water flow is required, and the connecting pipe is located high in the floor joist.
For large flow requirements, we primarily recommend FURO 113. If space in the joist is limited and FURO 123 is chosen, we suggest dual outlets for optimal performance.

Variants

Variable length and width (mm):

Length (L) = 300–1200, in increments of 100.
Width (B) = 300–600, in increments of 100.

The dimensions refer to the drain's grate size.

Fixed depths (mm):

Channel depth (RD) = 80
Depth at outlet (D) = 160
Waterway (V.g) = 115

Outlet placement:
End-positioned outlet.

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer

Water proofing: Clinkers on sandwiched waterproofing membrane

Water proofing drain flange: Clamping flange

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 123 floor drain.

Construction dimensions for floor drain FURO 113:

S_1: = B (Grate dimensions) + 310 mm
_F1: = B (Grate dimensions) + 250 mm

S 75

Side outlet Ø75 mm

Capacity 2,2 l/s

S75x2

Double side outlets Ø75 mm

Capacity 4,4 l/s

Slip-resistant grid, L15

Slip-resistant grid with load class L15.

Maximum load: 1500 kg

Part no. Z-GALLER-L15

Strainer basket double outlet, 1,0 liters

Strainer basket used when selecting double outlets.

Volume: 1.0 l

Part no. 1SKRD1

Strainer basket, 7,5 dl

Strainer basket for ROT drain and channel.

Volume: 7.5 dl

Part no. 1SKR1

Sand trap, double outlets, 1 liters

Sand trap used when selecting double outlets.

Volume: 1 l

Part no. 1SFRD1

Sand trap

Sand trap for ROT drain and channel.

Volume: 6, 0 dl

Part no. 1SFR1

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Documents

Technical overview (in swedish)

Installation instructions for earth braid