Stainless steel floor channel for kitchens, industrial settings, and workshops. Designed for long-lasting durability and easy installation in environments with light loads and efficient handling of large flows.

Floor drain channel, width 150 mm FURO 115

Stainless steel floor channel for kitchens, restaurants, and industries with lighter loads. Ideal as a barrier channel at transitions between different spaces. Multiple stocked sizes available for quick delivery.

The channel is ideal as a barrier or cleaning channel at transitions between different spaces in kitchens, restaurants, and industries.
Made of acid-resistant stainless steel, grade EN 1.4404 (SS 2348). This is not always necessary but provides better resistance to corrosion from salt and strong cleaning chemicals. Also available in stainless steel EN 1.4301 (SS 2333).
Lengths 500–2000 mm x width 150 mm are stocked for immediate delivery.
Designed for embedding in concrete floors. Also available for wooden beam floors.
Suitable for several common floor types and features 360° rotatable and angle-adjustable outlets.
Removable water trap with a handle for easy cleaning and maintenance.
EPDM rubber seals according to EN 681-1 type Wc.
Equipped with stainless, slip-resistant covers in sections weighing a maximum of 6 kg each for ergonomic handling. The product can be customized by selecting either a grating or slotted cover. See options under the grating section.

Installation:

Delivered with a cover to prevent concrete from entering the channel during casting.
Equipped with sturdy fastening ears for secure anchoring in the floor structure.
For resin floors, spacer strips are included on the adhesive flanges.
Adjustable legs allow easy height adjustment from above (see installation accessories).

L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.

Variants

Variable length (mm):

Length (L) = 500–20000 mm (in increments of 100)
Fixed width: 150 mm

Maximum length of 3000 mm applies to Clinker K4 and K5 as well as Vinyl flooring.
The dimensions refer to the channel's grating dimensions.

Variable depth:

56 mm (standard for channels up to 2000 mm)
100 mm (recommended for channels over 2000 mm)
150 mm (if large fall is needed, for example)

Outlet placement:

Standard is a center-mounted outlet, but there is an option to choose the placement.

Specify c/c from the left.

*For floor types Clinker K4 and K5, the depth dimensions differ from the above. For more information, see the section: "Water flow, total height, upper part depth, and slope towards the outlet"

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer

Water proofing: Clinkers on sandwiched waterproofing membrane

Water proofing drain flange: Clamping flange

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Vinyl flooring on wooden beams

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 115 floor channel:

*The product has a slope towards the outlet.

For more information, see the section:
"Water flow, total height, upper part depth, and slope towards the outlet"

Construction dimensions for FURO 115 floor channel:

S_1: = 460 mm
F₁= 400 mm

Drains and channels always have a connection pipe and their water flow (V.g.) to consider. Water flow is always measured from the so-called bottom line of the pipe.

To facilitate product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface to where the water exits the product. For bottom outlets, the measurement point is where the spigot begins.

The total height (H) is always made up of the top depth (D) plus the outlet section of the product. If the top depth is increased, the total height will also increase, affecting the product's water flow.

Dimensions for FURO 115:

The top depth (D) can be selected between 56, 100 and 150 mm (56 mm is standard for lengths up to 2000 mm).
For tile types K4 and K5, the top depth (D) varies between 36, 80, and 130 mm (36 mm is standard for lengths up to 2000 mm).
Thus, the total height (H) of FURO 115 varies between 173, 217 and 267 mm (173 mm is standard for lengths up to 2000 mm).
If an extension or inlet section is selected, the total height (H) increases by 60 mm.

Slope toward the outlet:

The product’s slope toward the outlet varies depending on length and chosen upper part depth. For the standard design with a centrally placed outlet, the following applies:

For lengths up to 2000 mm with the recommended depth of 56/36 mm, the slope toward the outlet is at least 1%.
For lengths between 2000 – 10,000 mm with the recommended depth of 100/80 mm, the slope toward the outlet is at least 1%.
For lengths between 10,000 – 20,000 mm with the recommended depth of 150/130 mm, the slope toward the outlet is at least 1%.

If other requirements than the above recommendations are needed, the slope will be affected.

S 75

Side outlet Ø75 mm

Capacity 1,6 l/s

B 75

Bottom outlet Ø75 mm

Capacity 2,3 l/s

B 110

Bottom outlet Ø110 mm

Capacity 1,9 l/s

Trap

Trap included as standard.
Can be retrofitted.

Part no. 126VH2

Trap with odor seal

Trap with mechanical odor seal.

Part no. 126VL12

Closable trap

A trap that can be shut off with a key. When choosing accessories, an extension part is required.

Part no. 126VA2

Slip-resistant grid, L15

Slip-resistant grid with load class L15.

Maximum load: 1500 kg

Part no. Z-GALLER-L15

Perforated plate, L15

Perforated plate with load class L15.

Maximum load: 1500 kg

Part no. Z-SILPLAT-L15

Slotted cover, L15

Slotted cover with load class L15.

Maximum load: 1500 kg

Part no. Z-SPALTLOCK-L15

Strainer basket

Smaller filter basket.

Volume: 2.5 dl
Capacity: 1.2 l/s

Part no. 133SK12

Strainer basket, 5 dl

Filter bucket suitable for drain without a trap and in a drain with additional extension part.

Volume: 5 dl
Capacity: 1.5 l/s

Part no. 133SK22

Sand trap 3 dl

Sand trap suitable for siphon configuration and in a drain with additional extension part.

Volume: 3 dl
Capacity: 0.6 l/s

Part no. 133SF21

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for water trap

Key for locking Vater trap 126VA2.

Part no. 1NV2

Fastening of perforated plate

Screwed perforated plate. Increases safety by preventing the plate from moving unintentionally.

Part no. 1VFG-115

Fastening of grating

Screw fastening of grating. Increases safety by preventing the grating from moving unintentionally.

Part no. 1VFG

Extension part

Provides space for extra-large accessories.
Increases the total height by 60 mm.

Part no. 1VPA126

Inlet part

Inlet part with connection Ø 50 mm.
Increases the total height by 60 mm.

Part no. 1VIN126

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Without trap

Floor drain without a trap. The trap can be retrofitted.

Capacity: 4 liters/second.

Part no. 1VSU126

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Documents

Technical overview (in swedish)

Type approval fire EI60 FURO 115

Installation instructions for earth braid