Sand trap channel FURO 153

Robust and durable sand trap channel made of stainless steel, ideal for industrial applications, workshops, and other demanding environments where effective particle separation is crucial. Equipped with a removable sand trap box and an end-mounted outlet.

Variable Length – The channel is available in lengths ranging from 600 to 20,000 mm (in increments of 100 mm) with a fixed width of 300 mm.
Durable and Corrosion-Resistant – Manufactured from stainless steel EN 1.4301 (SS 2333) for high durability and resistance to corrosion. There is also an option to manufacture the channel in acid-resistant stainless steel EN 1.4404 (SS 2348) for added resistance.
Flexible Installation – The sand trap channel is designed for embedding in concrete floors, compatible with various common floor types, and equipped with a 360° rotatable and angle-adjustable outlet for flexible installation.
Effective Sedimentation – The sand trap function is based on the sedimentation principle, where heavier particles settle at the bottom while lighter materials flow out into the drain during high flows. Therefore, the channel is most effective at lower flow rates.
Easy Maintenance and Cleaning – Removable water trap with handle and liftable sand trap box (volume 5 liters) facilitate emptying and maintenance.
Stainless Steel Grate – Designed in sections with a maximum weight of 8 kg per section, making handling smooth and safe.
Sealing – EPDM rubber seals according to EN 681-1 type WC ensure a tight and durable installation.

Installation:

Delivered with a cover to prevent concrete from flowing into the channel during pouring.
Equipped with mounting ears for secure anchoring to the slab.
For mass concrete floors, cut-out strips are included on the bonding flanges.
Adjustable feet allow for easy height adjustment from above (see installation accessories).

Technical Specification:

Material: Stainless steel EN 1.4301 (SS 2333) or acid-resistant stainless steel EN 1.4404 (SS 2348)
Length (mm): Variable between 600 and 20,000 mm (in increments of 100 mm)
Width (mm): 300
Volume of sand trap box: 5 liters
Grate: Stainless steel, designed in sections with a maximum weight of 8 kg per section
Outlet: End-mounted
Sealing: EPDM rubber seals according to EN 681-1 type WC

L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
R50 For areas with medium weight traffic. Tested acc. to EN 1253-1 with 33 kN load.
M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Variable length (mm):

Length (L) = 600–2000 (in increments of 100)
Fixed width = 300

Variable depth (mm):

Depth (D) = 192, a good choice for lengths up to 2000.
Depth (D) = 232, recommended for lengths between 2000–6000.
Depth (D) = 312, recommended for lengths over 6000.

The channel depth (Rd) thereby varies between 80, 120, and 200.

Outlet placement:

The standard is an outlet section positioned at the end, but it is possible to choose the placement.

Specify c/c from the left.

For more information, see the section: "Water flow, total height, upper part depth, and slope towards outlet".

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 153 floor channel:

*The product has a slope towards the outlet.

For more information, see the section:
"Water flow, total height, upper part depth, and slope towards the outlet".

Construction dimensions for FURO 153 floor channel:

S_1: = 395 mm
_F1: = 345 mm

Drains and channels always have a connection pipe and their water flow (V.g.) to consider. Water flow is always measured from the so-called bottom line of the pipe.

To facilitate product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface to where the water exits the product. For bottom outlets, the measurement point is where the spigot begins.

The total height (H) is always made up of the top depth (D) plus the outlet section of the product. If the top depth is increased, the total height will also increase, affecting the product's water flow.

Dimensions for FURO 153:

Upper part depth (D) can be switched between 192, 232, and 312 mm (232 mm is a good choice for lengths between 2000–6000 mm). The channel depth (RD) then changes between 80, 120, and 200 mm.
Total height (H) for FURO 153 thus varies between 324, 364 and 444 mm (364 mm is a good choice for lengths between 2000–6000 mm).
If an extension part or inlet part is selected, the total height (H) increases by 60 mm.

Slope towards the outlet:
The product's slope towards the outlet varies depending on length and chosen upper part depth. With the standard configuration and end-positioned outlet, the following applies:

For lengths up to 2000 mm and recommended depth of 192 mm, the slope towards the outlet is at least 1 %.
For lengths between 2000–6000 mm and recommended depth of 232 mm, the slope towards the outlet is at least 1 %.
For lengths between 6000–20000 mm and recommended depth of 312 mm, the slope towards the outlet is at least 0.7 %.

For needs other than the above recommendations, the slope is affected.

S 75

Side outlet Ø75 mm

Capacity > 4,0 l/s

S 110

Side outlet Ø110 mm

Capacity > 4,0 l/s

B 75

Bottom outlet Ø75 mm

Capacity > 4,0 l/s

B 110

Bottom outlet Ø110 mm

Capacity > 4,0 l/s

Trap

Part no. 220VH12

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Part no. 220VA2

Slip-resistant grid, L15

Slip-resistant grid with load class L15.

Maximum load: 1500 kg

Part no. Z-GALLER-L15

Grid, R50

Grid with load class R50.

Maximum load: 5000 kg

Part no. Z-GALLER-R50

Grid, M125

Grid with load class M125

Maximum load: 12500 kg

Part no. Z-GALLER-M125

Grate, M125

Grate with load class M125.

Maximum load: 12500 kg

Part no. Z-SPALTLOCK-M125

Strainer basket

Spacious stainless steel strainer basket.

Part no. 1SK331

Strainer basket, 1,2 liters

Volume: 1.2 l
Capacity: 4.0 l/s

Part no. 220SK32

Sand trap, 5 liters

Spacious sand trap in stainless steel.

Volume: 5.0 l

Part no. 1SF331

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for trap

Key for trap with shut-off.

Part no. 1NV1

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

Capacity: 6 liters per second

Part no. 1VSU220

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Documents

Technical overview (in swedish)

Installation instructions for earth braid

Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.

Download MagiCAD model for this product.

Sand trap channel FURO 153

Variants

Clinker floor K3

Resin flooring

Concrete floor

Trap

Trap with mechanical odor stop

Water trap, odor and backflow stop

Trap with shut-off function

Slip-resistant grid, L15

Grid, R50

Grid, M125

Grate, M125

Strainer basket

Strainer basket, 1,2 liters

Sand trap, 5 liters

Lifting tool

Key for trap

Radon sealing

Earth braid

Drain without trap

Mounting, threaded rod

Documents

BIM and CAD files

Do you have any questions?