Robust stainless steel floor drain designed for industrial settings, workshops, and environments with heavy traffic. Built for long-lasting durability and easy installation in high-load environments.

Floor drain FURO 139

Robust floor drain designed for environments with heavier loads such as industrial settings, workshops, garages, and parking garages. The drain's grate can withstand heavy traffic. Available in stock for quick delivery.

The drain's robust construction and grate with load class M125 make it ideal for environments with heavy traffic, such as industrial settings, workshops, garages, and parking garages.
Designed for installation in concrete floors with 360° swivel, angle-adjustable, and telescopic upper sections for many common floor types, including tile, resin floors, and steel-troweled concrete floors.
The floor drain is manufactured from acid-resistant stainless steel EN 1.4404 (SS 2348) for long durability and high corrosion resistance.
EPDM rubber seals in accordance with EN 681-1 type Wc.
Equipped with a removable trap with a handle for easy cleaning and maintenance.
Available in stock for immediate delivery.

Installation:

The drain is supplied with a cover to prevent concrete from flowing into the drain during pouring.
Equipped with sturdy mounting ears for secure anchoring in the structure.
For resin floors, spacer strips are included on the bonding flanges.
Adjustment legs allow for easy height adjustment from above (see installation accessories).

M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 139 floor drain

For more information, see the section:
"Water flow, total height, upper part depth, and slope towards outlet".

Construction dimensions for FURO 139 floor drain:

S₁ = Ø 260 mm
F₁ = Ø 180 mm

Drains and channels always have a connection pipe and a flow path to consider. The flow path is always measured at the so-called bottom line of the pipe.

To simplify product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface down to where the water exits the product. For bottom outlets, the measurement point is where the socket begins.

The total height (H) always consists of the depth of the upper part (D) plus the outlet part of the product. If the depth of the upper part is increased, the total height also increases, affecting the product’s flow path.

Dimensions for FURO 139:
Upper part depth (D) is 29 mm. The total height (H) is then 146 mm.

Slope toward outlet:
The slope toward the outlet is adapted to the product and floor type.

S 75

Side outlet Ø75 mm

Capacity 1,4 l/s

B 75

Bottom outlet Ø75 mm

Capacity 1,7 l/s

B 110

Bottom outlet Ø110 mm

Capacity 1,4 l/s

Trap

Trap included as standard.
Can be retrofitted.

Part no. 126VH2

Trap with odor seal

Trap with mechanical odor seal.

Part no. 126VL12

Closable trap

A trap that can be shut off with a key. When choosing accessories, an extension part is required.

Part no. 126VA2

Slotted cover, M125

Robust and durable slotted cover designed for heavy traffic.

Load class: M125

Part no. Z-126SLM11

Sand trap, 5 dl

Volume: 5 dl
Capacity: 5.5 l/s

Part no. 126SF52

Sand trap 3 dl

Sand trap suitable for siphon configuration and in a drain with additional extension part.

Volume: 3 dl
Capacity: 0.6 l/s

Part no. 133SF21

Strainer basket

Smaller filter basket.

Volume: 2.5 dl
Capacity: 1.2 l/s

Part no. 133SK12

Strainer basket, 5 dl

Filter bucket suitable for drain without a trap and in a drain with additional extension part.

Volume: 5 dl
Capacity: 1.5 l/s

Part no. 133SK22

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for water trap

Key for locking Vater trap 126VA2.

Part no. 1NV2

Screwing down the slotted cover

Part no. 1VF139

Extension part

Provides space for extra-large accessories.
Increases the total height by 60 mm.

Part no. 1VPA126

Inlet part

Inlet part with connection Ø 50 mm.
Increases the total height by 60 mm.

Part no. 1VIN126

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Documents

Technical overview (in swedish)

Installation instructions for earth braid

Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.

Download MagiCAD model for this product.