Floor drain FURO 152

Floor drain FURO 152

Golvbrunn med upplyftbar sandfångslåda.
  • Dim. 300 x 300 mm.
  • Kvalitet rostfritt EN 1.4301 (SS 2333) alt. syrafast rostfritt EN 1.4404 (SS 2348).
  • För ingjutning i betonggolv.
  • Överdelar för klinkergolv, massagolv, plastmatta samt stålslipat betonggolv som är vridbara 360°, vinkelställbara och teleskopiska.
  • Golvbrunnen har urtagbart vattenlås med handtag.
  • EPDM-gummipackningar enligt EN 681-1 typ Wc.
  • Rostfritt rutgaller.
  • Med upplyftbar sandfångslåda, volym 5 liter.
  • Sandfångsfunktionen bygger på sedimenteringsprincipen och fungerar bäst vid låga flöden. Vid höga flöden följer det lätta materialet med ut i avloppet.
  • Installationstillbehör som ingår: Levereras täckt för att hindra betong från att rinna ner i brunnen under gjutning. Rejäla fästöron för förankring i bjälklaget. Dessa ger möjlighet till enkel höjdjustering ovanifrån. Vid massagolv ingår ursparingslister på vidhäftningsflänsar.
  • L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
  • M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.
410343ed-264b-4180-9b04-62ff0f3e54f0.png

Immediate delivery

Variants

Clinker floor K3

Clinker floor K3

Floor material: Clinker in adhesives
Water proofing: Floor without waterproofing
Water proofing drain flange: None
Clinker floor K4

Clinker floor K4

Floor material: Clinker directly on waterproofing layer
Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange
Water proofing drain flange: 50 mm wide stainless adhesive flange
Clinker floor K5

Clinker floor K5

Floor material: Clinker directly on waterproofing layer
Water proofing: Clinkers on sandwiched waterproofing membrane
Water proofing drain flange: Clamping flange
Resin flooring

Resin flooring

Floor material: Resin flooring
Water proofing: Compound floor
Water proofing drain flange: Recess for resin floor
Vinyl flooring

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm
Water proofing: Vinyl flooring
Water proofing drain flange: FURO clamping flange

Vinyl flooring on wooden beams

Floor material: Vinyl flooring 1,5-4 mm
Water proofing: Vinyl flooring
Water proofing drain flange: FURO clamping flange
Concrete floor

Concrete floor

Floor material: Concrete floor
Water proofing: Floor without waterproofing
Water proofing drain flange: None
FURO152_BMATT_1.png

Dimensions for FURO 152 sand trap drain

 


For more information, see the section:
"Water flow, total height, upper part depth, and slope towards outlet".

Byggmått_brunn_SM_1.jpg

Construction dimensions for FURO 152 sand trap drain:

S1 = 550 mm
​​​​​​​F1 = 490 mm

Drains and channels always have a connection pipe and a flow path to consider. The flow path is always measured at the so-called bottom line of the pipe.

To simplify product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface down to where the water exits the product. For bottom outlets, the measurement point is where the socket begins.

The total height (H) always consists of the depth of the upper part (D) plus the outlet part of the product. If the depth of the upper part is increased, the total height also increases, affecting the product’s flow path.

 

Dimensions for FURO 140:
Upper part depth (D) is 192 mm. The total height (H) is then 324 mm.

If an extension or inlet part is selected, the total height (H) increases by 82 mm.


Slope toward outlet:
The slope toward the outlet is adapted to the product and floor type.

220S75_utlopp.png
S 75

Side outlet Ø75 mm

Capacity > 4,0 l/s

220S110_utlopp.png
S 110

Side outlet Ø110 mm

Capacity > 4,0 l/s

220B75_utlopp.png
B 75

Bottom outlet Ø75 mm

Capacity > 4,0 l/s

220B110_utlopp.png
B 110

Bottom outlet Ø110 mm

Capacity > 4,0 l/s

Trap

Trap

Part no. 220VH12

Trap with mechanical odor stop

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Trap with shut-off function

Part no. 220VA2

Galler L15 Maxlast 1500kg

Galler L15 Maxlast 1500kg

Slip-resistant grid with load class L15.

  • Maximum load: 1500 kg

Part no. Z-1GFL315

Galler M125 Maxlast 12500kg

Galler M125 Maxlast 12500kg

Grid with load class M125

  • Maximum load: 12500 kg

Part no. Z-1GFMU33

Spaltlock M125 Maxlast 12500kg

Spaltlock M125 Maxlast 12500kg

Grate with load class M125.

  • Maximum load: 12500 kg

Part no. Z-1SLM331

Strainer basket, 1,2 liters

Strainer basket, 1,2 liters

  • Volume: 1.2 l
  • Capacity: 4.0 l/s

Part no. 220SK32

Lifting tool

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for water trap

Key for water trap

Key for locking Water trap 220VA2.

Part no. 1NV1

Inlet

Inlet

Inlet with 50 mm smooth socket for easy connection.

Part no. 1VIN50

Radon sealing

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Drain without trap

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

  • Capacity: 6 liters per second

Part no. 1VSU220

Mounting, threaded rod

Mounting, threaded rod

Easy adjustment from above.

  • Height 300 mm.
  • Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

  • Height: 300 mm
  • Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Sealant Aqua Tät

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

BVB.svg SH.png EPD.png

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us

BIM

Do you need BIM or CAD files for your project? Download the files you need by clicking the buttons below.

Magicad Cloud MagiCAD Selection tool