Work bench on stand FURO 909-00

Work bench on stand FURO 909-00

Flexibel arbetsbänk för exempelvis skola, sjukhus, butik och livsmedelsindustri.

Build your bench

  • Idealisk för skola, förskola, livsmedelsbutik, livsmedelsindustri och sjukhus.
  • För sjukhusmiljöer med Vårdhygien klass 2, exempelvis vårdrum, sköljrum och desinfektionsrum. För Vårdhygien klass 3 se FURO 905.
  • Valfri längd mellan 500 och 5160 mm. Bredd 650 mm.
  • Bänkplan av 1,25 mm slipad rostfri plåt. Dubbel plåt används för ljuddämpande egenskaper.
  • Tillverkas helt i rostfritt stål i kvalitet EN 1.4301, helt utan organiska material. Se Variantutförande för bänkplan i syrafast rostfritt stål, EN 1.4404.
  • Stabil och slitstark konstruktion.
  • Många valmöjligheter med hjälp av alla tillbehör.
  • Väggfäste och ställbara fötter ingår. För montering dikt an vägg eller med distans upp till 100 mm.

 

Technical Specifications

Material: Stainless steel EN 1.4301 / Acid-resistant EN 1.4404 (optional)
Hygiene Class: Healthcare Hygiene Class 2.
Length: Customizable from 500–5160 mm.
Width: Standard 650 mm. Alternatives: 620 or 700 mm via configurator.
Worktop: 1.25 mm brushed, double stainless steel sheet.
Installation: Wall mounting flush to wall, or offset up to 100 mm.
Legs/Feet: Adjustable 880–950 mm.

  • För bänk med extra brett bänkplan se FURO 904-60.
  • Arbetsbänken är flyttbar men önskas en bänk på hjul se FURO 909-40.

Variants

Build your countertop according to your measurements and preferences. Here, you can also equip your countertop with the accessories and additional details you want. 
 

FURO909-00_BMATT_1-sv-se.jpg

Adjustable height:
The bench's legs are adjustable to a height between 880 and 950 mm.

FURO909-00_BMATT_2-sv-se.jpg
Cutout

Cutout

For example, for air duct. Compatible with I-, G-, and O-edges. Specify placement and exact dimensions for proper installation.

Part no. 9VUAK.

Standard edge profiles

G

Edge profile G

Standard som framkant, gavlar och bakkant.

Edge profile variants

Edge profile V

Edge profile P

Edge profile T

Edge profile O

Edge profile PO

Edge profile I

Täckning av kanter

Avslutningen av Kantprofil V täcks alltid.

Sink BE-50

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BE501

Sink BE-50

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BE502

Sink BE-50

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BE50UB2

Sink BE-55

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BE551

Sink BE-55

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BE552

Sink BE-55

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BE55UB2

Sink BE-70

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BE701

Sink RLE-34

Basket waste included. Stainless steel grade EN 1.4301.

Part no. 9RLE341

Sink RLE-34

Hygienic design without overflow, made of acid-resistant stainless steel, grade EN 1.4404. Delivered with a welded spout.

Part no. 9RLEL34UB2

Sink RLE-34

Basket waste included. Without overflow. Acid resistant quality EN 1.4404.

 

 

Part no. 9RLEL34UBK2

Sink Round Ø350

Sink with rinsing function, suitable for laboratory environments. Hygienic design without overflow. Delivered with a welded drain spout and hygienic strainer.

For more information:
Installation instructions for Flushing Rim

Part no. 9RS352

Wash basin TL-50

Material: Stainless steel EN 1.4301
Design: Wash basin without overflow, with stainless steel strainer and rubber plug.

Part no. 9TL501

Sink BE-SPECIAL

Manufactured with custom dimensions.

Maximum dimensions: 1600x500x480 mm [LxWxD]

Minimum dimensions: 250x250x50 mm [LxWxD]

With overflow. Stainless steel grade EN 1.4301.

The depth can not exceed the width!

Part no. 9BESPEC1

Sink BE-SPECIAL

Manufactured with custom dimensions.

Maximum dimensions: 1600x500x480 mm [LxWxD]

Minimum dimensions: 250x250x50 mm [LxWxD]

With overflow. Acid resistant quality EN 1.4404.

The depth can not exceed the width!

Part no. 9BESPEC2

Sink BE-SPECIAL without overflow

Manufactured with custom dimensions.

Maximum dimensions: 1600x500x480 mm [LxWxD]

Minimum dimensions: 250x250x50 mm [LxWxD]

Without overflow. Stainless steel grade EN 1.4301.

The depth can not exceed the width!

Part no. 9BESPECUB1

Sink BE-SPECIAL

Manufactured with custom dimensions.

Maximum dimensions: 1600x500x480 mm [LxWxD]

Minimum dimensions: 250x250x50 mm [LxWxD]

Without overflow. Acid resistant quality EN 1.4404.

The depth can not exceed the width!

Part no. 9BESPECUB2

Sink BE-SPECIAL

Stainless steel grade EN 1.4301. With overflow and strainer. Size 700x500x240 mm.

Part no. 9BE7050241

Sink BE-SPECIAL

Stainless steel grade EN 1.4301. With overflow and strainer. Size 700x500x360 mm.

Part no. 9BE7050361

Sink FRE-34

Basket waste included. Stainless steel grade EN 1.4301.

Part no. 9FRE341

Sink RT-18

Basket waste included. Stainless steel grade EN 1.4301.

Part no. 9RT181

Sinks BD-50 (double)

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BD501

Sink BD-50 (double)

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BD502

Sink BD-50 (double)

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BD50UB2

Sink BD-55 (double)

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BD551

Sink BD-55 (double)

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BD552

Sink BD-55

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BD55UB2

Sinks BD-70 (double)

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BD701

Sink RLD-34 (double)

Basket waste included. Stainless steel grade EN 1.4301.

Part no. 9RLD341

Sink RLD-34

Basket waste included. Without overflow. Acid resistant quality EN 1.4404.

Part no. 9RLDL34UBK2

Sink FRD-34 (double)

Basket waste included. Stainless steel grade EN 1.4301.

Part no. 9FRD341

Lower sheet metal shelf

Lower sheet metal shelf

Removable stainless steel lower shelf, supplied in sections.

  • Depth: 500 mm

Part no. 992

Middle Shelf

Part no. 997

Plåtunderhylla

Part no. 992-UH2

Plåtmellanhylla, slät

Part no. 997-01-MH2

Lower wire shelf

Lower wire shelf

The shelf is made from stainless steel wire grid. The grid is recessed between the front and rear braces and is removable in sections.

  • Depth: 500 mm

Part no. 991

Plåtunderhylla, slät

Part no. 992-01

Plåtmellanhylla, slät

Part no. 997-01

Plåtmellanhylla

Part no. 997-MH2

Covered Sides

Covered Sides

Frame with covering. Front and rear struts are removed to provide space for a dishwasher.

Part no. 9VTG, täckt gavel, höger/vänster

Part no. 9VTGH, heltäckt gavel, höger/vänster

Open rack

Open rack

Rack without struts at the front, available for the entire length of the bench or a portion of the length.

Cabinet, Single Door

Cabinet, Single Door

Cabinet with a bottom shelf and one removable shelf, adjustable in five positions. The door has concealed, self-closing hinges with soft-close function for quiet closing.

  • Width: 400, 500, 600 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 972-01V, vänsterhängd dörr

Part no. 972-01H, högerhängd dörr

Part no. 972EH400

Cabinet, Double Doors

Cabinet, Double Doors

Cabinet with a base and one removable shelf, adjustable in five positions. Doors have concealed, self-closing hinges with soft-close function for quiet closing. Specify width and placement.

  • Width: 600, 800, 1000, 1200 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 972-02D

Drawer Unit, 3 Drawers

Drawer Unit, 3 Drawers

A drawer unit with three fully extendable drawers that slide on stored expansion fittings. The drawers with a width of 400 mm come with plastic containers, while the others have metal insert boxes. Please specify the width and placement.

  • Width: 400, 500, 600 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 975-01

Drawer unit, 2 drawers

Drawer unit, 2 drawers

A unit with two fully extendable drawers that slide on stored expansion fittings. The drawers with a width of 400 mm come with plastic inserts, while the other sizes include a metal insert box. Please specify the desired width and placement.

  • Width: 400, 500, 600 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 975-05

Drawer

Drawer

A fully extendable drawer that slides on stored expansion fittings. The drawer with a width of 400 mm comes with a plastic insert, while the other sizes feature a metal insert.

  • Width: 400, 500, 600 mm
  • Height: 185 mm
  • Depth: 575 mm

Part no. 981-01

Lådhurts 2 lådor

Lådhurts 2 lådor

Part no. 975-05-400

Lådhurts 3 lådor, B = 400 mm

Lådhurts 3 lådor, B = 400 mm

Part no. 975-01-400

Drawer

Drawer

A pull-out drawer provides secure storage for tools, equipment, documents, or sensitive materials.

  • Width: 600 mm

Part no. 981-01-600

Underskåp, B=600mm

Underskåp, B=600mm

Part no. 972-02D600

Underskåp, B=400mm

Underskåp, B=400mm

Part no. 972-01V400

Faucet hole

Faucet hole

Diameter 35 mm. Standard placement (from the rear wall of the sink to the center of the faucet hole):

  • c/c 40 mm
  • c/c 55 mm (if the sink has an overflow on the rear wall)
     

Sinks wider than 450 mm require a bench width of 700 mm.

Part no. 9HB35

Blandarfäste, högt för dusch.

Blandarfäste, högt för dusch.

Part no. 989-01-1

Blandarfäste, högt, utan hål.

Blandarfäste, högt, utan hål.

Part no. 989-01-2

Fästplåt FURO 989-39

Fästplåt FURO 989-39

Part no. 989-39

Fästplåt FURO 989-30

Fästplåt FURO 989-30

Part no. 989-30

Drawer

Drawer

A pull-out drawer provides secure storage for tools, equipment, documents, or sensitive materials.

  • Width: 400 mm

Part no. 981-01-400

Underskåp, B=400mm

Underskåp, B=400mm

Part no. 972-01H400

AMA
AMA code: PUF.11
MagiCAD Cloud

BIM and CAD files

Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.

Magicad Cloud

Here you can download fixed MagiCAD models of the product. Missing the model in MagiCAD? Contact Furhoffs and we will help you!

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us