Manual height‑adjustable hygiene bench FURO 918-M

Manual height‑adjustable hygiene bench FURO 918-M

Manually height-adjustable hygiene bench designed to meet high hygiene standards in environments such as laboratories, operating departments, and dialysis units according to Vårdhygien klass 3.

Build your bench

  • A hygiene bench equipped with a crank, allowing height adjustment between 700 and 1000 mm. This makes it easy to adapt the working position for different users and tasks, reducing strain on the back and joints.
     
  • The bench is designed to meet Healthcare Hygiene Class 3, making it ideal for environments with strict hygiene requirements.
     
  • Smooth surfaces, including underneath, make the bench easy to clean—crucial for areas where hygiene is the highest priority.
     
  • A fully welded frame and sink collar eliminate joints that could harbor bacteria.
     
  • The worktop is made of 1.25 mm acid-resistant stainless steel (EN 1.4404), ensuring durability and providing a stable structure with sound-dampening properties.
     
  • Available in custom lengths from 500 to 2800 mm, with a standard width of 650 mm. Benches longer than 1900 mm include an additional centrally placed leg pair for extra stability.
     
  • Manufactured to meet Vårdhygien klass 3 (Healthcare Hygiene Class 3) standards, making it ideal for high-hygiene environments.

Technical Specifications
Applications: Laboratories, operating rooms, dialysis units, endoscopy
Worktop material: Acid-resistant stainless steel (EN 1.4404)
Height adjustment: 700–1000 mm (manual crank)
Worktop thickness: 1.25 mm, sound-dampening
Length: 500–2800 mm (custom length)
Width: 650 mm
Frame and sink collar: Fully welded to eliminate joints
Hygiene classification: Vårdhygien klass 3

Sink Bowls:

  • All sink bowls are made of acid-resistant stainless steel (EN 1.4404) and are designed without an overflow to prevent bacterial growth and ensure the highest hygiene standards.
     
  • To minimize splashing from the bottom of the sink bowl, a minimum depth of 200 mm is recommended.
     
  • Sink bowls with a width of 500 mm or more can only be combined with a worktop that is 700 mm wide (see section "Countertop" for details).
     
  • When selecting two or more sink bowls in the bench, a minimum spacing of 100 mm between the bowls is recommended to facilitate cleaning and maintain high hygiene standards.
     

Accessories:

  • Any accessories, such as cabinets and drawers, should be mounted 40 mm inside the leg frame to facilitate cleaning and prevent dirt from accumulating in hard-to-reach corners.

Variants

Build your countertop according to your measurements and preferences. Here, you can also equip your countertop with the accessories and additional details you want. 

FURO918-A_BMATT_1.jpg
FURO918-A_BMATT_2.jpg
Wider countertop

Wider countertop

Countertop with a width of 700 mm.

Part no. 9VB700.

Standard edge profiles

P

Edge profile P

Standard for front edge and gables. Can also be selected for the rear edge.

V

Edge profile V

Standard as rear edge. Can also be selected for gables. Height 50 mm.

Edge profile variants

Edge profile G

Can be selected as front edge, gables, and rear edge.

Sink BE-50

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BE50UB2

Sink BE-55

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BE55UB2

Sink RLE-34

Hygienic design without overflow, made of acid-resistant stainless steel, grade EN 1.4404. Delivered with a welded spout.

Part no. 9RLEL34UB2

Sink Round Ø350

Sink with rinsing function, suitable for laboratory environments. Hygienic design without overflow. Delivered with a welded drain spout and hygienic strainer.

For more information:
Installation instructions for Flushing Rim

Part no. 9RS352

Sink BE-SPECIAL

Manufactured with custom dimensions.

Maximum dimensions: 1600x500x480 mm [LxWxD]

Minimum dimensions: 250x250x50 mm [LxWxD]

Without overflow. Acid resistant quality EN 1.4404.

The depth can not exceed the width!

Part no. 9BESPECUB2

Sink BD-50 (double)

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BD50UB2

Sink BD-55

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BD55UB2

Undershelf

Undershelf

Easy-to-clean sheet undershelf made of acid-resistant stainless steel, grade EN 1.4404. Rear edge is raised, and other edges are folded down.

  • Depth: 560 mm.

Part no. 992H

Plåtunderhylla

Part no. 992H2

Open rack

Open rack

Rack without struts at the front, available for the entire length of the bench or a portion of the length.

Splash Guard

Splash Guard

Splash guard for wall mounting. Made of acid-resistant stainless steel, grade EN 1.4404.

  • Height: 100–700 mm
  • Length: 500–3000 mm

Part no. 9SB1U2, syrafast utan skruvhål

Base Cabinet

Base Cabinet

Base cabinet with a bottom and an adjustable shelf in five positions. Smooth sides, bottom, and back for easy cleaning. Doors with concealed, self-closing hinges and soft close.

  • Width: 400, 500, 600 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 972-01VH, vänsterhängd dörr

Part no. 972-01HH, högerhängd dörr

Base Cabinet, Double Doors

Base Cabinet, Double Doors

Base cabinet with a bottom and an adjustable shelf in five positions. Smooth sides, bottom, and back for easy cleaning. Doors with concealed, self-closing hinges and soft close.

  • Width: 600, 800, 1000, 1200 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 972-02DH

Drawer unit, three drawers

Drawer unit, three drawers

Three fully extendable drawers on mounted expansion slides. Drawers with a width of 400 mm come with plastic bins, and the others with a metal insert tray. Please specify width and placement.

  • Width: 400, 500, 600 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 975-01H

Drawer

Drawer

A fully extendable drawer that slides on mounted expansion brackets. The drawer with a width of 400 mm comes with a plastic bin, while the others include a metal insert.

  • Width: 400, 500, 600 mm
  • Height: 185 mm
  • Depth: 575 mm

Part no. 981-02H.

Extra shelf

Extra shelf

Extra shelf, width 400 mm.

Part no. 972-EH-400

AMA
AMA code: PUF.11

BIM and CAD files for your project

Do you need BIM or CAD files for your project? Easily configure your workbench in our configurator and download the correct files directly.

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us