Manually height-adjustable workbench FURO 916-M
Build your bench
- Stainless Steel Workbench with individually adjustable height
- Height-adjustable between 750–950 mm or 700–1000 mm.
- Ideal for schools, preschools, large kitchens, restaurants, grocery stores, the food industry, and hospitals.
- For hospital environments requiring Healthcare Hygiene Class 2, e.g., care rooms, washrooms, and disinfection rooms. For Healthcare Hygiene Class 3, see FURO 905.
- Custom length from 500 to 3540 mm, width 650 mm.
- Worktop made of 1.25 mm brushed stainless steel. Double sheet used for sound-dampening properties.
- Manufactured entirely in stainless steel EN 1.4301, without organic materials. See variant options for worktop in acid-resistant stainless steel EN 1.4404.
- Stable and durable construction.
- Many customization options available with a wide range of accessories.
- The bench is manually raised and lowered using a crank, with an adjustment range of 200 or 300 mm. For an automatic height-adjustable version, see FURO 916-A.
- For hygiene reasons, hospitals choose sink bowls without overflow outlets. If the same approach is desired in schools or large kitchens, ensure that a floor drain is present in the room.
- Load capacity: For 4- to 6-leg systems, the maximum load is 100 kg per leg, with a maximum of 300 kg per system.
Variants
Build your countertop according to your measurements and preferences. Here, you can also equip your countertop with the accessories and additional details you want.
Faucet hole
Diameter 35 mm. Standard placement (from the rear wall of the sink to the center of the faucet hole):
- c/c 40 mm
- c/c 55 mm (if the sink has an overflow on the rear wall)
Sinks wider than 450 mm require a bench width of 700 mm.
Part no. 9HB35
Acid-resistant countertop
Countertop in acid-resistant stainless steel, grade EN 1.4404.
Part no. 9VSFBP
Standard edge profiles
Edge profile P
Standard for the front edge and end panels. Can also be selected for the back edge.
Edge profile T
Standard for the back edge. Can also be selected for end panels.
Edge profile variants
Edge profile G
Can be selected for the front edge, end panels, and back edge.
Edge profile V
Can be selected for end panels and back edge.
Täckning av kanter
Kantprofil T täcks i framkant om den väljs som gavel. Kantprofil V täcks alltid.
Sink RLE-34
Basket waste included. Without overflow. Acid resistant quality EN 1.4404.
Part no. 9RLEL34UBK2
Sink Round Ø350
Sink with rinsing function, suitable for laboratory environments. Hygienic design without overflow. Delivered with a welded drain spout and hygienic strainer.
For more information:
Installation instructions for Flushing Rim
Part no. 9RS352
Sink BE-SPECIAL
Part no. 9BESPEC1
Sink BE-SPECIAL
Part no. 9BESPEC2
Sink BE-SPECIAL without overflow
Part no. 9BESPECUB1
Sink BE-SPECIAL
Part no. 9BESPECUB2
Sink BE-SPECIAL
Part no. 9BE7050241
Sink BE-SPECIAL
Part no. 9BE7050361
Middle Shelf, sheet metal
Removable stainless steel shelf in sections
- Depth: 500 mm
Part no. 996, gallerhylla
Undershelf, sheet metal
Removable stainless steel undershelf in sections.
- Depth: 500 mm
Part no. 992
Wire Baskets
Drawer unit with three wire baskets in white-painted steel, mounted on stainless steel glide rails. Basket size: 427 x 427 x 185 mm.
Dimensions:
- Width: 500 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 9TKT
Gypsum separator
Volume: 13 l.
Dimensions: 360 x 370 x 430 mm.
Installation: The countertop must be mounted flush against the wall. The gypsum separator can be installed within the range of 200–405 mm from the wall (c/c measurement from the separator's inlet to the wall).
Front supports and any shelf/grate are excluded when installing the gypsum separator.
Part no. 9GA
Strainer bucket
Strainer bucket with a liftable strainer basket placed in the wash basin. Can only be used in combination with BE, BD, and K wash basins.
- Volume: 1.6 liters.
Part no. 9SH
Gallerunderhylla
Shelf made of stainless steel grate. The grate is recessed between the front and back braces and is removable in sections.
- Depth: 500 mm
Part no. 991
Middle Shelf
Removable stainless steel shelf in sections.
- Depth: 500 mm
Art.nr: 997, raised back edge
Art.nr: 997-01, flat shelf
Art.nr: 996, grid shelf
Cabinet, Single Door
Cabinet with a bottom shelf and one removable shelf, adjustable in five positions. The door has concealed, self-closing hinges with soft-close function for quiet closing.
- Width: 400, 500, 600 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 972-01V, vänsterhängd dörr
Part no. 972-01H, högerhängd dörr
Part no. 972EH400
Cabinet, Double Doors
Cabinet with a base and one removable shelf, adjustable in five positions. Doors have concealed, self-closing hinges with soft-close function for quiet closing. Specify width and placement.
- Width: 600, 800, 1000, 1200 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 972-02D
Part no. 972EH800
Drawer Unit, 3 Drawers
A drawer unit with three fully extendable drawers that slide on stored expansion fittings. The drawers with a width of 400 mm come with plastic containers, while the others have metal insert boxes. Please specify the width and placement.
- Width: 400, 500, 600 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 975-01
BIM and CAD files
Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.
Here you can download fixed MagiCAD models of the product. Missing the model in MagiCAD? Contact Furhoffs and we will help you!
Do you have any questions?
Do you have questions and concerns about production or do you need help with planning?
Common questions Contact us