Electrically height-adjustable workbench FURO 916-A
Build your bench
- A stainless steel workbench with electric height-adjustment, ideal for schools, hospitals, kitchens and restaurants, as well as retail and the food industry.
- The bench’s height-adjustment allows for a varied and ergonomic working position and increases workplace accessibility by adapting to different user needs. The high adjustability also provides better access under the bench, facilitating cleaning and maintenance of the room—important for maintaining a clean and hygienic environment.
- The bench can be manufactured in acid-resistant stainless steel, always with a double sheet worktop. Double sheets reduce noise levels, contributing to a productive and pleasant working environment. The product’s durable and robust construction makes it a sustainable choice, both environmentally and economically.
- A wide range of accessories and variant options allows the bench to be customized to specific operational needs. See “Accessories” and “Variant Options.”
- Using our configurator, the bench can be tailored for an optimal solution for the workplace’s specific requirements. The length can be adjusted for optimal use of the space.
Technical Specifications FURO 916-A
Height adjustment: 750–950 mm (200 mm range) or 700–1000 mm (300 mm range)
Control unit: IP-65 rated
Load capacity for 4- to 6-leg systems: max 100 kg per leg, max 300 kg per system
Sheet quality: EN 1.4301 or EN 1.4404
Worktop: 1.25 mm brushed, double sheet stainless steel
Custom length: 500–3540 mm, width 650 mm
Control Unit Specifications
- Display with height-adjustment function
- CE marked
- Mains voltage: 230 VAC
- Connection: Plug-in
- Motor voltage: 24 VDC
- Lifting speed: 15 mm/sec
- Overcurrent protection
- Thermal fuse
For an electrically height-adjustable bench compliant with Healthcare Hygiene Class 3, see FURO 918-A.
- For hygiene reasons, hospitals choose sink bowls without overflow outlets. If the same approach is desired in schools or large kitchens, ensure that a floor drain is present in the room.
- Load capacity: For 4- to 6-leg systems, the maximum load is 100 kg per leg, with a maximum of 300 kg per system.
Variants
Build your countertop according to your measurements and preferences. Here, you can also equip your countertop with the accessories and additional details you want.
Faucet hole
Diameter 35 mm. Standard placement (from the rear wall of the sink to the center of the faucet hole):
- c/c 40 mm
- c/c 55 mm (if the sink has an overflow on the rear wall)
Sinks wider than 450 mm require a bench width of 700 mm.
Part no. 9HB35
Acid-resistant countertop
Countertop in acid-resistant stainless steel, grade EN 1.4404.
Part no. 9VSFBP
Standard edge profiles
Edge profile P
Standard for the front edge and end panels. Can also be selected for the back edge.
Edge profile T
Standard for the back edge. Can also be selected for end panels.
Edge profile variants
Edge profile G
Can be selected for the front edge, end panels, and back edge.
Edge profile V
Can be selected for end panels and back edge.
Täckning av kanter
Kantprofil T täcks i framkant om den väljs som gavel. Kantprofil V täcks alltid.
Sink RLE-34
Basket waste included. Without overflow. Acid resistant quality EN 1.4404.
Part no. 9RLEL34UBK2
Sink Round Ø350
Sink with rinsing function, suitable for laboratory environments. Hygienic design without overflow. Delivered with a welded drain spout and hygienic strainer.
For more information:
Installation instructions for Flushing Rim
Part no. 9RS352
Sink BE-SPECIAL
Part no. 9BESPEC1
Sink BE-SPECIAL
Part no. 9BESPEC2
Sink BE-SPECIAL without overflow
Part no. 9BESPECUB1
Sink BE-SPECIAL
Part no. 9BESPECUB2
Sink BE-SPECIAL
Part no. 9BE7050241
Sink BE-SPECIAL
Part no. 9BE7050361
Middle Shelf, sheet metal
Removable stainless steel shelf in sections
- Depth: 500 mm
Part no. 996, gallerhylla
Undershelf, sheet metal
Removable stainless steel undershelf in sections.
- Depth: 500 mm
Part no. 992
Wire Baskets
Drawer unit with three wire baskets in white-painted steel, mounted on stainless steel glide rails. Basket size: 427 x 427 x 185 mm.
Dimensions:
- Width: 500 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 9TKT
Gypsum separator
Volume: 13 l.
Dimensions: 360 x 370 x 430 mm.
Installation: The countertop must be mounted flush against the wall. The gypsum separator can be installed within the range of 200–405 mm from the wall (c/c measurement from the separator's inlet to the wall).
Front supports and any shelf/grate are excluded when installing the gypsum separator.
Part no. 9GA
Strainer bucket
Strainer bucket with a liftable strainer basket placed in the wash basin. Can only be used in combination with BE, BD, and K wash basins.
- Volume: 1.6 liters.
Part no. 9SH
Gallerunderhylla
Shelf made of stainless steel grate. The grate is recessed between the front and back braces and is removable in sections.
- Depth: 500 mm
Part no. 991
Middle Shelf
Removable stainless steel shelf in sections.
- Depth: 500 mm
Art.nr: 997, raised back edge
Art.nr: 997-01, flat shelf
Art.nr: 996, grid shelf
Cabinet, Single Door
Cabinet with a bottom shelf and one removable shelf, adjustable in five positions. The door has concealed, self-closing hinges with soft-close function for quiet closing.
- Width: 400, 500, 600 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 972-01V, vänsterhängd dörr
Part no. 972-01H, högerhängd dörr
Part no. 972EH400
Cabinet, Double Doors
Cabinet with a base and one removable shelf, adjustable in five positions. Doors have concealed, self-closing hinges with soft-close function for quiet closing. Specify width and placement.
- Width: 600, 800, 1000, 1200 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 972-02D
Part no. 972EH800
Drawer Unit, 3 Drawers
A drawer unit with three fully extendable drawers that slide on stored expansion fittings. The drawers with a width of 400 mm come with plastic containers, while the others have metal insert boxes. Please specify the width and placement.
- Width: 400, 500, 600 mm
- Height: 600 mm
- Depth: 575 mm
Part no. 975-01
BIM and CAD files
Do you need BIM or CAD files for your project? Download the files you need by clicking the links below.
Here you can download fixed MagiCAD models of the product. Missing the model in MagiCAD? Contact Furhoffs and we will help you!
Do you have any questions?
Do you have questions and concerns about production or do you need help with planning?
Common questions Contact us